Chiptuning

Cars

Audi

TT RS

8S mk1 2014 2018
RS - 2.5 TFSI
We developped the BRP+ option package to provide our customers with the ultimate driving experience. By adding new program code to the original engine management system we can now programm new functions like Launch Control, No Lift Shift , Anti Theft Mode and many more. Even more driving pleasure for those who can handle it.
Available options
  • Map Switching / Multimap

    The Map Switch or Multimap feature allows the driver to cycle through a number of different engine calibrations and operating modes. You can just select the driving mode that suits your needs best at any given time like race, sport, normal, eco, full stock, valet or anti-theft mode.


    Watch video
  • Pops & Bangs

    "Pops & Bangs" also called "Crackle Map", "Burble on overrun" or "Schubblubbern" is the sound of fuel detonating in your exhaust when releasing the throttle. We developed this feature to keep the turbocharger's rpm up and thus greatly reduce reaction time when you go back on the throttle after a deceleration. Basically it's an anti-lag feature for the turbo but of course you can also use it to impress your friends and to give your car a racecar sound!


    Watch video
  • Hard Rev Cut

    Hard Rev Cut allows the engine to reach max RPM without the ECU slowing down acceleration just before hitting the rev limiter. The result is more power to redline and a definable redline feeling!


    Watch video
  • Start-Stop Desactivation

    This function will make sure your car won't automaticaly cut the engine when comming to a stop. A must have for the racers out there!

  • Exhaust Flap Control

    Exhaust Flap Control allows you to control or change the opening and closing of the exhaust valves for more or less sound. When the valves are closed, the exhaust is in quiet mode. When fully opened, the exhaust system is in maximum flow mode and therefore the sound of your exhaust is louder.


    Watch video
  • Catalyst Heating

    The catalytic proces in the catalyst only works if the catalyst is hot, so in order to keep emissions low, it's critical that the catalyst is heated quickly after the engine start.

    It's the coldstart function that has to heat up the catalyst as fast as possible to it's optimal operating temperature. This is achieved by increasing idle RPM and changing the ignition timing.
    The increased idle rpm of the cold start and the increased exhaust sound that goes with it might be annoying if your car is catless.


    Watch video
  • Exhaust flap(s) controller

    With our exhaust valve controller, you can open or close your exhaust valves at your convenience.
    You will be able to increase or reduce the sound of the exhaust regardless of the vehicle's driving modes.

    Our valve controller is only compatible with vehicles with valves on the original exhaust system.

Price depending on chosen options, contact us for a quote.
Have any questions ? Contact us for more info
Video BRP+





  • Milltek
  • Forge
  • Sachs Performance
  • Mountune Performance
  • KW Suspensions
  • BMC Air Filters
  • Carbonio
  • Akrapovic
  • Ragazzon
  • Ferodo Racing
  • Red Bull
  • Cargraphic
  • Supersprint
  • Pipercross
  • RSR Spa
  • Remus
  • Armytrix
  • HRE
  • IPE Exhaust
  • Thor
  • RSR Nurburg

Stay informed!

Subscribe to our newsletter.